Cleaning - Aurora Vortix Vr1000 Manuel D'utilisation Et D'entretien

USE & CARE MANUAL
Replace lights
To replace the lights follow the following steps:
- Remove the inner lamp lens cover by inserting a
small flat blade screwdriver into each of the three
slots and gently pry it free.
- Grasp the bulb and pull it straight out.
- Replace with 12 volt, 20 watt halogen bulbs with a
G4 base.
- Replace inner cover by inserting the three retaining
tabs into the three slots and pressing them firmly in
place.

Cleaning

Clean the metal when it is dirty; don't wait until it requires aggressive cleaning in
order to restore it to its original appearance.
To clean the stainless steel we recommend using products designed for this
purpose and clean soft cloths, sponges or paper towels.
AVOID ALL CONTACT WITH PRODUCTS CONTAINING HYDROCHLORIC
ACID SUCH AS BLEACH, as they can stain and damage the stainless steel
surface.
PK-4101 (Rev.1)
Warning
Prior to changing the light, switch
power off at service panel to avoid
any risk of accident. Allow the light
to cool before handling.
Page 3