Operation; Measuring Current - GMC-I PRO SyS ACF 3000_4/24 Notice D'utilisation

4. OPERATION

4.1

MEASURING CURRENT

Read safety section of instructions before operating this product.
Ensure conductor to be tested is de-energized
Connect the output of the probe to the input of a measurement device.
The flexible current probe is not for use on conductors with a
potential of over 1000V.
Wrap the flexible probe around the conductor to be tested, close coupling.
Energize the circuit under test. Locate the coupling away from nearby
conductors.
Always use appropriate equipment for personal protection. Do not
use the flexible current probe to measure bare conductors unless
wearing protective clothing suitable for high voltage work.
5