Accessories; Product Liability And Warranty - ADURO 9-3 Mode D'emploi

_______________________________________________________________________________________________________________________________
Combustion chamber
The yellow tiles in the combustion chamber eventually wear out and they should be replaced when the cracks are
more that 0.5 cm. The durability of the tiles will depend on how often and how intensively the stove is used. You
can change the tiles yourself. They are available as a ready-to-use set. You can also buy one-piece tiles that you
can cut to the size of the worn plates yourself. Please visit www.aduroshop.com.
Ash
Empty the ash drawer before it becomes completely full. Always leave a layer of ash on the bottom of the stove, as
this insulates the combustion chamber and makes lighting a fire easier.
Cleaning the wood burning stove
The stove's surface is treated with a heat-resistant Senotherm® paint, which will stay at its best just by being
vacuumed with a small, soft mouthpiece or dusted with a soft, dry cloth. Do not use water, spirit or other solvents
which will remove the paint.
The inside of the wood burning stove and the flue pipe can be cleaned via the door and the cleaning aperture in the
flue pipe/chimney. The upper fireproof tile (the exhaust deflector) can be removed. To allow free access to the top
of the wood burning stove and the flue pipe, remove the exhaust deflector in steel. Cleaning of the inside of the
wood burning stove and the flue pipe should be undertaken at least once a year, or more frequently if necessary,
depending on how often the wood burning stove is used. This work can also be carried out by the chimney sweep.
Repairing the surface
If the surface of your wood burning stove gets scratched or worn, it can easily be refaced/renewed using the
original Senotherm® paint in an aerosol can. It is available in black or grey from your local dealer.
Please note: All maintenance and cleaning of the wood burning stove should be carried out when it is cold.
Spare parts and unauthorized alterations
You may only use original spare parts in the wood burning stove. Read more at www.aduroshop.com. All forms of
unauthorized alterations to the wood burning stove are strictly forbidden, as the wood burning stove will no longer
comply with the approved specifications.

6.0 Accessories

There is a wide product range of accessories for Aduro stoves:

Companion sets

Firebaskets in felt, PET and bonded leather

Firewood buckets

Briquette bucket and ashbucket

Glass and steel floor plates

Flue pipes

Aduro Firelighter

Aduro Easy Clean pad

7.0 Product liability and warranty

In accordance with the Danish Sale of Goods Act, product liability will exist for two years from the date of purchase
of the wood burning stove. The dated receipt will be sufficient proof. Product liability will not cover damage caused
by incorrect installation and use of the wood burning stove. Likewise, product liability will not cover loose parts and
wear parts (fireproof tiles, glass, gaskets, rails, cast iron grate and control), as they are worn by ordinary use.
These parts can be purchased as spare parts.
7.1 Free online warranty registration
Aduro will give you the opportunity to extend the above warranty on your wood burning stove from two to five
years. All you need to do is to access our website at
in our warranty database. The warranty will only come into force once you have entered the required information in
all the data fields. The deadline for registering your wood burning stove is five months from the date of purchase.
8.0 FAQ
If you need more information, please go to www.adurofire.com.
Enjoy your stove!
www.adurofire.com and register your new wood burning stove
27