Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher 200065 Mode D'emploi

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the device regularly after each use.
o Clean the container from the inside with a mild detergent and rinse it with fresh water
thoroughly.
o In order to clean the drain tap, pass water with detergent through it a few times and
then rinse it with water to remove completely detergent residues.
o Do not use steel wool for cleaning. Small pieces may come loose and be deposited
in the drain valve and damage the sealing surfaces.
o Clean the lid under warm running water and then rinse it with clean water.
o Wipe the outer part of the device with a damp, soft cloth. Use a mild detergent, if
necessary.
o Use only a soft cloth and never use any kind of abrasive cleaners which could
scratch the surface.
o Never use flammable cleaning agents (alcohol, etc.), as there is an increased risk of
fire or explosion during restart of the device.
o If scale or other residues are deposited on the bottom of the container, remove them
with conventional solutions. Please observe the instructions of the manufacturer.
o After cleaning, use a soft, dry cloth to wipe dry and polish the surface.
- 27 -