Assistance; Receipt And Storage; Technical Data; Packaging Contents - Lofrans THETIS 1002 Manuel D'installation

1.2 Assistance

The Lofrans products are backed throughout the world by a network of authorised distributors and assistance. In case of need,
please contact your local Lofrans distributor. Details on website www.lofrans.com

1.3 Receipt and Storage

Upon receipt of the package, verify the integrity of packing. Should it be necessary to store the product for a prolonged period,
keep it in a dry and protected place.

2 TECHNICAL DATA

Power Supply
Power consumption in standby
Power consumption when in use
Operation temperature (°C)
Protection rating
Dimensions (mm)
Weight (g)
USE ONLY ON DIRECT CURRENT WITH LOAD UP TO 2 AMPS / MUST BE USED WITH CONTACTORS OR A CONTROL BOX

3 PACKAGING CONTENTS

33.3
The Hand Held Control packaging includes:
 1 Hand Held device-THETIS 1002
 1 Cradle with 2 screws

4 INSTALLATION

For mounting the female connector, drill on the dashboard one hole of 20.5 mm (~13/16") and secure the female plug with the back
locking nut (Fig. A) to dashboard with a thickness not exceeding 10mm. Put the gasket between the rear part of the plug and the
dashboard. For instructions on making electrical connections, see the wiring diagram below (Fig.B).
(±1)
20
(Fig. A)
4
Up to 30V DC
0 mA
15 mA (12 V DC)
-10 / +60
IP67
154 x 59 x 38
120
This product is in
compliance with the
following regulations:
Ø2.2x4
Ø20.5
Common
-Yellow
Extra features:
• Normally open contacts
• Cable can be extended up to 4 meters
• Ergonomic case, soft finishing
EN 55032: 2015
EN 55024: 2010+A1: 2015
Up
(Red)
E
 1 Connector 3-pole (female plug)
 1 Installation and user's manual
L
Down
(Blue)
1 Up/Red
3
THETIS 1002
Common (Yellow)
N
Female
connector
2
Down/Blue
(Fig. B)