Connection Example; Assembly Instructions - Franke ZAQUA007 Notice De Montage Et De Mise En Service

8.

Connection Example

☞
The line length and the number of fittings depends on the overall power of the
components that are to be connected.
a: red (RD)
b: white (WH)
c: blue (BU) on blue (3)
c: black (BL)
9.

Assembly Instructions

☞
When installing several compact system power supplies, to ensure an unimpeded
flow of cooling air, it is important to provide a minimum distance of 15 mm to neigh-
bouring parts.
Installing on a wall - Velcro straps
9.1 Fasten the compact system power supply to the wall using Velcro straps (provided).
Installing on a wall - Screws
9.2 Mark the holes for the 2 fastening screws.
9.3 Drill according to the markings.
9.4 Insert the dowels.
☞
Depending on the composition of the wall, special wall dowels may have to be used
(not included).
9.5 Use 2 screws in the tabs to mount the compact system power supply to the wall.
Installing on a wall - Stay bolts
9.6 Mark the holes for the 2 stay bolts.
9.7 Drill according to the markings.
9.8 Insert the dowels.
☞
Depending on the composition of the wall, special wall dowels may have to be used
(not included).
9.9 Turn the 2 stay bolts into the dowels.
9.10 Slide the compact system power supply on to the fastening tabs on the stay bolts.
9.11 Use washers and nuts to mount the compact system power supply on to the stay
bolts.
6