Everybot Edge Guide Rapide page 18

How to use and charge
• Please charge the product fully before the first
operation.
• When charging the battery, the button on the
main unit and the remote control does not work.
• Do not use any other power adapter other than
the adapter which came with the unit.
1 Wet the mops throughly in water
and apply them in the main
unit after wringing them out.
4 Close the rubber caps and
attach the reservoirs under
the Everybot Edge. Press the
attachment while you rotate it
until a clear click is heard.
Yellow LED Blinks
Low Battery Level
2 Attach the mop pads to fit the
joint parts to the holes of the
water supply mop kit.
Correct
Wrong
5 Press the operation button
more than 2sec. to turn on the
main unit.
Blue LED Blinks
Medium Battery Level
3
6
15
LED is OFF
Full Battery
Open the rubber cap of the
water supply mop kit and fill
the water into the water tank.
Correct Wrong
Press the operation button on
the main unit or play button of
a remote control to startthe
machine.