SCALESON S212 Mode D'emploi page 14

4. Commissioning
4.3 Power supply
Power is supplied by 4 AAA batteries as standard. Insert them into the battery compartment on the
bottom of the scale.
5. Operation
5.1 Power on
Press the ON/TARE/OFF button to turn the power on.
When 0 appears, the scale is ready to weigh.
5.2 Switching units
Press the MODE button to change the unit of measurement from kg to lb.
5.3 Taring Function
Place the weight to be tared (e.g. towel or blanket) on the platform and press the ON/TARE/OFF button
The display will return to zero, which will zero the weight placed on the platform.
Place the baby on the scale. Only the weight of the baby is displayed.
To exit the tare mode, remove the baby and the underlay from the scale. The display shows a negative
weight value. Press the ON/TARE/OFF button to reset the display to zero and clear the tared weight.
5.4 Weighing
Place the baby on the scale as centrally as possible. The display shows the weight value.
5.5 Display of stored values
By pressing the MEM button, you can display the last weight determined at any time.
5.6 Switch Off / Shutting Down Safely
Press and hold the ON/TARE/OFF button for about 3 seconds to turn off the scale.
To save power, the scale will automatically turn off after 10 seconds without further key activity or
weight change. If weight remains on the scale, the scale will turn off after about 5 minutes.
14