Jole mimzy spin 3in1 Mode D'emploi page 9

Highchair Assembly
Please read all the instructions in this manual before assembling and using this product.
Assemble Frame
see images
1
!
Please check the direction when assembling the foot.
Assemble Seat
see images
2
Fit the seat onto the frame. An audible "click" means the seat is secured to the frame.
!
Lift the seat up to be sure it is locked into place.
!
The seat or the frame can not be used separately.
Assemble small insert Pad
see images -
3 5
Assemble the seat pad by following these steps:
1. Open the seat.
2. Wrap the seat pad over the top of seat back.
3. Insert the two straps through openings in seat back.
!
Please make sure the straps are secured to the seat back to prevent the seat pad from slipping.
4. Pull all the harnesses through the slots in seat pad.
!
Small seat pad is for child's protection. A child 0-6 months must use small seat pad.
Highchair Operation
Adjust Calf Support
see images
6
The calf support has 2 position settings.
Adjust Footrest
see images -
7 8
The footrest can be adjusted to 3 positions.
Use Buckle
see images -
9 10
Note
1. To avoid serious injury from falling or sliding out, always secure your child with harness.
2. Make sure your child is snugly secured, and that the space between the child and the shoulder
harness is about the thickness of one hand.
3. DO NOT cross the shoulder belts. This will cause pressure on child's neck.
15
2
3
4
Adjust Height for Shoulder Harnesses
see images -
11 13
Note
1. The shoulder harness must go into the slot that is even with or slightly above the shoulders.
2. In order to protect your child from falling out, after your child is placed into the seat, check
whether the shoulder harnesses are at proper height.
3. For larger child, use the upper shoulder slots. For smaller child, use the lower shoulder slots.
!
When changing shoulder harness slots, make sure shoulder harnesses are going through same slots in seat
pad and seat back.
Adjust Length for Harnesses
see images
14
Use slide adjuster to change the harness length.
14
Press the button -2, while pulling the waist harness to proper length.
14
Use Tray
see images -
15 20
!
Always fit the tray horn to the tray. Once the tray horn has been fitted, it must never be removed.
!
The tray can be entirely pulled out. Be careful when pulling the tray to the end of the seat.
!
Ensure both sides of tray are in matching positions.
!
Pull tray backward to ensure both guides are secure.
Use Tray Cover and Tray Insert
see images -
21 23
Note
1. The tray can be used together with the tray cover or the tray insert.
2. When placed on the dinner table, the tray cover and tray insert can be used as tray pads.
3. The tray cover and the tray insert have the same operation.
Adjust Height for Seat
see images
24
There are 5 height positions. The seat can be adjusted to the proper height according to the height of your
dinner table, which makes it more convenient for your child to have meals together with family.
!
DO NOT adjust the height of the seat with child in it.
-1
-3
14
16