Programme Selection And Special Functions; Programme Settings - Hoover HLSI 460PW Mode D'emploi

PROGRAMME SELECTION
AND SPECIAL FUNCTIONS
(Use in conjunction with programme guide)
"POWER WASH" button
"SOFT PROGR." button
These buttons allows you to change the
wash intensity, according to how dirty your
dishes are, by adjusting the wash time and
temperature.
The combination of the buttons with the 4
main wash programmes enables to have 8
additional wash cycles (achieving a total of
12 programmes of washing).
By pressing the "POWER WASH" button the
intensity of the wash cycle will be increased
and will enable the wash action of the third
cleaning arm, positioned at the bottom of the
dishwasher ("POWER WASH").
This function allows cleaning of heavily
soiled tableware or cookware, by placing
them directly in the area of the basket above
the "POWER WASH".
By pressing the "SOFT PROGR." button the
intensity of the wash cycle will be decreased,
reducing the wash length time.
IMPORTANT
When the dishwasher is switched on,
the last used setting will be indicated.

Programme settings

Open the door and place the dirty dishes
inside the appliance.
Press the "ON/OFF" button
display will show two lines.
Choose a programme by pressing the
"PROGRAMME SELECTION" button
("PROGR.").
If you wish, press the "POWER WASH"
or "SOFT PROGR." button.
If you wish, press the option button (the
corresponding indicator light will turn on).
The option button can be selected or
deselected WITHIN one minute of the
programme commencing.
Press the "START" button.
The length of the program will be shown on
the display alternating hours with minutes
[I.e.: 1 h (1 hour) / 25 (25 minutes)].
Close the door (after an audible signal
has sounded, the programme will start
automatically).
WHITIN one minute of the programme
commencing, another programme
can be selected, by pressing the
"PROGRAMME SELECTION" button
(it is also possible to select or deselect
the "POWER
PROGR." buttons).
49
. The
WASH" or "SOFT