Statistics Function; Default Values; Descaling; Turning The Appliance Off - V-ZUG CCSXSL60 Mode D'emploi

Statistics function

This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until "STATISTICS"
is displayed;
3. Press the OK button (B4);
4. By pressing the ▽ and △ buttons (B5 and B6), you can
check:
- how many coffees have been made;
- how many milk drinks have been made;
- the total number of litres of water delivered.
- how many times the machine has been descaled.
5. Press the P/ ESC button (B7) twice to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the P /ESC button (B7) to enter the menu;
2. Press the ▽ and △ buttons (B5 and B6) until "DEFAULT
VALUES" is displayed;
3. Press the OK button (B4);
4. "CONFIRM?" is displayed;
5. Press the OK button (B4) to confirm and exit.

Descaling

Descale the machine when the message "DESCALE" flashes on
the display.
Important!
Descaler contains acids which may irritate the skin and eyes.
It is vital to respect the manufacturer's safety warnings given on
the descaler pack and the warnings relating to the procedure to
follow in the event of contact with the skin and eyes.
Please note:
Use lactic acid bacteria based descaler, for example De'Longhi
SKU: 5513214981.
Under no circumstances should you use sulphamic or acetic ba-
sed descalers. Their use invalidates the guarantee.
Failure to descale the appliance as described above also invali-
dates the guarantee.
1. Turn the machine on.
2. Enter the settings menu by pressing the P / ESC button (B7).
Press the ▽ and △ buttons (B5 and B6) until "DESCALE" is
displayed;
3. Press the OK button (B4) and "CONFIRM?" is displayed,
press the OK button (B4) and pour the descaler.
4. Before confirming, empty the water tank completely
(A12).
Pour the descaler diluted with water (respecting the pro-
portions indicated on the descaler pack) into the water tank
and put the water tank back in the appliance.
Danger of burns!
Hot water containing acid flows out of the hot water spout.
Avoid contact with splashes of water.
5. Place an empty container with a minimum capacity of 1.5
litres under the hot water spout.
6. Confirm with the OK button (B4).
7. After confirming by pressing OK, the message "DESCALING
UNDERWAY" is displayed.
The descale programme starts and the descaler liquid co-
mes out of the water spout.
The descale programme automatically performs a series of
rinses and pauses to remove limescale deposits from inside
the machine.
After about 30 minutes, the message "RINSING FILL TANK" is
displayed.
8. The appliance is now ready for rinsing through with clean
water. Remove the water tank, empty, rinse under running
water, fill with clean water and replace.
"RINSING PRESS OK" is displayed.
9. Empty the container used to collect the descaler solution
and replace it under the hot water spout.
10. Press the OK button (B4) to start rinsing.
Hot water flows out of the spout and the message "RINSING
PLEASE WAIT" is displayed.
11. When the water tank is completely empty, the message
"RINSING COMPLETE PRESS OK" is displayed.
12. Press the OK button (B4). The appliance goes off automati-
cally.

TURNINg THE APPLIANCE OFF

Each time the appliance is turned off, it performs an automatic
rinse cycle which cannot be interrupted.
Danger of burns! During rinsing, a little hot water
flows from the coffee spouts.
Avoid contact with splashes of water.
To turn the appliance off, press the ON/OFF/standby button
(A7).
The appliance performs a rinse cycle then goes off.
Please note: If the appliance is not used for an exten-
19
EN