Maintenance And Cleaning - Teesa TSA0201 Manuel D'utilisation

Owner's manual
not be supplied through an external switching device, such as a timer, or connected to a circuit that
is regularly switched on and off by the utility.
1. Before first use peel off any labels and remove tapes, foil packaging etc.
2. Make sure to place appliance is on a flat, dry and heat-resistant surface.
3. Turn the temperature knob to "off" position.
4. Plug the power cable to the power supply socket. And put the pot on the plate. Note: do not turn
on the plate with no pot placed on the plate.
5. Switch on the temperature knob to the desired setting (between MIN and MAX). The indication
light will go on which signalizes heating up to set temperature. When the indicator light goes off,
the plate have reached the set temperature. The thermostat cycles on and off to maintain the set
temperature.
WARNING: The appliance will be very hot. DO NOT touch the appliance while in use or it has not cooled
down completely.
6. Turn the knob to off and unplug the appliance when not in use and let it cool down before storing
or moving.
IMPORTANT: It is advised not to use the product for longer than 1 hour at a time. After 1 hour operation,
unplug it from power mains and allow to cool down.
NOTES
• Always use flat bottom saucepans or pots that make close contact with the heating plate.
• Avoid dropping any liquid on the plate for long-life performance.
• At first use, the appliance may release an odor and slight smoke. This is a normal reaction caused by
initial heating of the plate.
• Exercise caution during operation - risk of burning!
• Before each cleaning, disconnect the device from the power supply and make sure it's completely
cooled down.
• For cleaning, use a soft cloth moistened with water or a paper towel.
• To clean stubborn food residue stains, use a cloth soaked in soapy water.
• After cleaning, dry the device thoroughly.
• Never immerse the appliance, cord or plug in water or other liquids.
• Do not use abrasive cleaning agent. Never use metal, sharp or coarse cleaning utensils as they can
damage the plates.
Heating plate
Thermostat knob
OPERATION

MAINTENANCE AND CLEANING

SPECIFICATION
TSA0201
Main features
1
1
TSA0202
11
EN
TSA0203
2
2