Product Introduction
Multi-charger can expand the battery interface to be multiple. It can
be used with the EVO Nano standard adapter, which can connect up
to 3 EVO Nano batteries for charging.
Battery port
1
Power port
2
Product use
�. Connect the power supply
Connect the EVO Nano standard adapter to the power socket (100-240V),
and then plug the charging connector into the power port of the
multi-charger. After powering on, the LED indicator will light up, showing
a blue light or a green light.
�. Charge
Insert the aircraft battery into the battery port to start charging.
Once inserted, the indicator light will begin to flash slowly. When all
the batteries are fully charged, the indicator light will be off. Do not
cover the overcharge when charging.
1
8
2