Sharp IG-BC2U Manuel D'utilisation page 15

Plasmacluster Ion Generating Unit (electrode section)
Every 6 months or more often if necessary
Remove the filter cover and
1
unit connection plug.
Remove the fixing screw with
2
coin etc. and pull out the unit.
R e m o v e t h e d u s t f r o m
3
the electrode section and
around the electrode of the
unit with a cotton swab.
Use caution when cleaning
electrodes as their positions
are fixed and any bending
or changing of shape may
cause irreparable damage to
Plasmacluster Ion Generating
Unit.
Re-install the unit and fix with
4
the screw.
Connect unit connection plug
5
and set the filter cover.
<AFTER THE UNIT MAINTENANCE>
electrode section
Do not touch
the Terminal
connections
Press the Mode Button and check the Unit
Replacing Light is lighting (green).
E-13
[Before maintenance]
electrode section
around the
electrode
[After maintenance]