YBA Passion IA350A Livret D'utilisation page 6

Passion IA350A Integrated Amplifier
Discovering your IA350A: Front view
1
ON/OFF switch: Use this button to switch ON or switch OFF your IA350A. If using a digital
1
source it is necessary to switch the digital power switch on the rear panel to the ON position
2
before switching on the power to the IA350A.
Input selector: Selects between the six different inputs.
2
DISPLAY and IR sensor: All information relating to the operation of your IA350A appears here.
3
Point the remote control to this zone to control your IA350A from a distance.
Volume control: To adjust volume, set to zero upon installation.
4
0
P O W E R
1
2
2
3
4
5
6
Page 6
2
Using your YBA remote control
Point your remote control to the IR receiver located in the display
window of your IA350A.
Select the device you want to control between AMP, CD and AUX. To
0
control the IA350A, you need to select AMP button.
Note: AMP will remain the active function until you select another
device.
1 SOURCE+/SOURCE-: Press SOURCE+/SOURCE- to skip to the desired
source.
2 VOLUME+/VOLUME-: Press + to increase volume, or - to decrease the
output volume of the amplifier. This is a universal control and does not
require specific source selection.
VIEW: Hold (> 3 seconds) display brightness dims. Hold again display turns off
3
Hold again, display turns on.
FCT: Hold to store current volume level.
4
AUDIO: Press to resume to the stored volume level.
5
6
MUTE: Press to mute. Press again to exit mute.
IMPORTANT NOTE:
PRESS means a short press on a key.
HOLD means a key press for more than 3 seconds.
www.ybahifi.com
3 4