Installation and use :
Installation :
- Hand dryer can be placed in a bath room, kitchen or lavatory...
- The appliance must be at 110cm over any surface. It should not be placed near doors and
should not be affected by water projection (washbasin, bath...)
- Drill four holes as shown on the picture.
- Fix the main part of the appliance on the wall at the chosen place.
- Then, fix the housing on.
- Connect the appliance and make a test.
Use:
- The appliance runs on automatic way. Just place your hands under the hand dryer, it will set
up automatically.
130 mm
115 mm
Floor
212 mm
1200mm
19