Radio Mode - LEXIBOOK Barbie RPB060 Mode D'emploi

Snooze function
When the alarm rings, press the SNOOZE/LIGHT key to switch on the snooze function. The
flashes on the LCD screen and the alarm will ring again
7 minutes later. To switch off the snooze function and stop the alarm, press and hold the MODE, SET,
UP or DOWN keys for 2 seconds. The
again the next day at the same time.
Note:
• If you have selected the regular alarm ringtone, if you don't press any key when the alarm goes
off, it will ring for 10 minutes. If you have selected a preset radio station to wake up, the radio will be
turned on for 1 hour.
• In alarm time setting mode, if you do not press any key for 10 seconds, the unit will automatically go
back to clock mode.

RADIO MODE

Radio stations preset manual setting
1. In clock mode, press the MODE key once to switch on the radio.
2. Press the UP or DOWN keys to select a preset number between the 20 numbers available (from
01 to 20).
3. Press and hold the SET key until the frequency's digits start flashing.
4. Use the UP or DOWN keys to scan the radio frequencies up or down. Press once to scan in 0.1
increments. Press and hold the same keys to auto-scan to the next or the previous radio station.
5. Once the desired station is assigned to the selected preset number, press the SET key to confirm
and save the change.
6. Repeat the above process from step 2 until all the preset numbers are assigned to a radio station.
Radio stations preset automatic setting
1. In radio mode, press and hold the SET key until the frequency's digits start flashing.
2. Press and hold the SET key once again to start the automatic setting of the stations preset.
3. The unit automatically assigns a frequency of a received radio station to a preset number.
4. When the automatic setting is completed, the unit will automatically broadcast the first preset radio
station ("01").
Listening to the radio
1. In clock mode, press the MODE key once to switch on the radio.
2. Press the UP or DOWN keys to toggle between the 20 preset radio stations.
3. Press and hold the UP or DOWN keys to scan the radio frequencies up or down.
Note: When the radio is not set on a radio frequency, there is no sound coming out of the speaker.
Sleep mode
1. When the radio is turned on, press the SET key once to enter the "Sleep" function setting mode.
2. Press the UP or DOWN keys to select the time delay before the radio automatically switched itself
off. You can choose from "00" to "90" (minutes).
Note: if you select "00", the "Sleep" function will be disabled.
3. Press the SET key to save your settings and switch on the "Sleep" function.
4. The radio will operate during the selected time delay, and then it will automatically switch off.
Note:
• While the sleep timer is activated the stations can be changed. During the time delay setting, if you
don't press any key for 5 seconds, the unit will automatically exit the "Sleep" function setting mode.
• If you press the MODE key, the radio and the sleep timer will be switched off, the unit goes back to
clock mode.
icon disappears from the LCD screen. The alarm will ring
10
icon