Description Of The Tool Indication; Remarks In Respect Of The Determined Use; Operation Of The Units; Explanation Of The Application Range - Textron Company Klauke EK 60 VPFT-L Mode D'emploi

Instruction Manual Crimping tool
EK 60 VPFT-L
The new tools feature an integrated pressure sen-
sor which automatically identifi es the achieved crim-
ping force during every crimping operation. If a de-
viation from the set operation pressure is identifi ed,
an acoustic signal sounds and a red display fl ashes
(tab. 1).
A white LED illuminates the working space after ac-
tivating the trigger. It automatically switches off 10
sec. after releasing the trigger. This feature can be
deactivated (see page III)
Through an optional USB adapter a report can be
generated at the end of a working session at a PC
documenting the proper function of the tool.
The compact ergonomically formed design consists
2K
of 2 components. The grip area is rubber coated
and therefore slip resistent. The housing design is
optimized in respect of the center of gravity which
improves the handling and supports fatique-proof
working.
Li-Ion batteries do neither have a memory effect nor
self discharge. Even after long periods of non ope-
ration the tool is always ready to operate. In addition
we see a lower power weight ratio with 50% more
capacity and shorter charging cycles compared to
NiMH batteries.
The oil used in our tool is highly biologically degra-
deable and not hazardous to Water and has been
rewarded „The Blue
low temperatures and has excellent lubrication cha-
racteristics.

3.3 Description of the tool indication

See Tab. 1.
Prior to operating the unit the charging level of the batte-
ry should have been tested. A low charging level can be
detected by the fl ashing of the LED for 20 s at the end of
a crimping cycle.
4. Remarks in respect of the
determined use
Before starting any work on electrical appliances it must
be safeguarded that there are no live parts in the immedi-
ate assembly area of the user. If this not possible special
precaution measures (see EN 50110-1) for working near
live parts must be provided.
Keep your working area clean and tidy. Do not use this
tool when you are tired, on drugs, had alcohol or if you
are medicated.
4.1 Operation of the unit
Cycle: see pictures in front
Attention
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Attention
Keep proper footing and balance at all times.
Attention
Use safety gear and always wear eye protec-
tion.
HE.13443_C © 05/2010
Angel". The oil is suitable for

4.2 Explanation of the application range

The tool is a dieless crimper supplied with 4 indenters to
crimp primarily Klauke connecting material (see following
table):
Tab. 3
suitable for
Tubular cable-lugs and
connectors
„standard type",
Tubular cable-lugs for
switch gear connections
Tubular cable-lugs and
connectors for
fi ne stranded conductors
For other applications please contact your service partner
If different conducting materials have to be crimped, ple-
ase contact the manufacturer.
Attention
Do not crimp on live cables or conductors.
The tool is not insulated.
The hand held tool is not supposed to be restrained in a
vise. It is not allowed to use the tool in a stationary appli-
cation. Complying certain conditions the unit can be ope-
rated stationary with our presentation support EKST-L.
The conditions can be taken from the instruction manual
of the EKST-L.
The tool is not designed for continued crimping opera-
tions. After a sequence of approximately 40-50 completed
crimps you have to make a break of 15 min. to give the
tool time to cool down.
Attention
Too intensive use can cause heat damages for
the tool
Attention
During the operation of electric engines sparks
can occur which might ignite highly infl ammab-
le or explosive liquids and materials
Attention
Electric-hydraulic crimping tools should not be
operated in pouring rain or under water.

4.3 Mounting instructions

A fault will be notifi ed by optical (red LED) and accustical
signals as indicated in table 1. If the red LED indicates 3
times and simultaneously 3 accustic signals occure the
crimp is faulty. In this case the crimp must be repeated.
Please read the assembly instructions in our general ca-
talogue.
Conn.- Crimping Crim-
material range. ping
mm² profi le
16 - 300
16 - 300
GB
2