Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information .....................................3-4
Identification .................................................................. 5
Specifications ................................................................ 5
Operation ....................................................................6-7
Preparation ................................................................ 6
Crimping .................................................................6-7
cUL and UL Classified Crimps................................... 7
Connector Table ......................................................... 7
Maintenance ...............................................................8-9
Schedule .................................................................... 8
Periodic Pressure Relief Valve Check .....................8-9
Verify Crimping Distance ........................................... 9
Español ...................................................................11-19
Français ..................................................................21-29
Illustration and Parts List ........................................30-31
Greenlee / A Textron Company
Description
The HK12ID Hydraulic Crimping Tool is a hand-held,
self-contained, dieless crimping tool intended to crimp
aluminum and copper connectors onto electrical cable.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Blackburn is a registered trademark of Thomas & Betts.
KEEP THIS MANUAL
2
HK12ID Dieless Crimping Tool
HK12ID Dieless Crimping Tool
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Publicité
Chapitres
Table des Matières
