Introduction; Proper Use; Description Of Parts; Technical Data - LIVARNO home HG06201 Instructions De Montage, D'utilisation Et Consignes De Sécurité

Basin mixer tap

Introduction

We congratulate you on the purchase of your new
product. You have chosen a high quality product.
Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer
to the operating instructions and the safety advice
below. Only use the product as instructed and only
for the indicated field of application. Keep these in-
structions in a safe place. If you pass the product on
to anyone else, please ensure that you also pass on
all the documentation with it.

Proper use

This product is suitable for all pressure-tight hot water
systems such as central heating boilers, instantaneous
water heaters, pressurised boilers and the like. It is
not suitable for low-pressure water heaters such as
wood or coal burning bath geysers, oil or gas bath
geysers, open electrically heated water tanks. If in
doubt please seek the advice of a plumber or heating
engineer. Any use other than that described here or
modification to the product is not permitted and may
lead to damage to persons or property. There is
also the risk of injury and loss of life. The product is
intended for personal use only and not for medical or
commercial use. The manufacturer accepts no liability
for loss or damage arising from improper use.

Description of parts

1 Tap body
1
1 Base
2
1 O-ring
3
1 Plastic washer
4
1 Metal washer
5
1 Metal rod
6
1 Plastic nut
7
2 Flexible hoses (1 x hot water, 1 x cold water)
8
1 Hexagon key
9
1 Plug
10
6 GB/IE/NI
1 Upper eccentric section
11
1 Upper Eccentric seals (foam)
12
1 Lower Eccentric seals (plastic)
13
1 Lower eccentric section
14
1 Eccentric nut
15
1 Knee joint bar
16
1 Eccentric joint
17
1 Pull-rod (Part 2)
18
1 Pull-rod (Part 1)
19
1 Control lever
20
1 Locking screw
21
1 Cap
22
1 Cartridge end ring
23
1 Cartridge locking ring
24
1 Setting ring
25
1 Cartridge
26
1 Mixer nozzle
27
1 Key for mixer nozzle
28

Technical data

Connections:
Water connection nut:

Safety advice

OF LIFE OR ACCIDENT TO IN-
FANTS AND CHILDREN! Never
leave children unsupervised with the packaging
materials. Danger of suffocation. Keep the product
away from children. The product is not a toy.
CAUTION - RISK OF ELECTRIC
SHOCK! Leaks or the escape of
water can lead to danger to life from
electric shock. Check all connections for leaks
carefully. In addition, ensure that all cables from
electrical devices are correctly and safely installed.
CAUTION! RISK OF INJURY! Please ensure
that no parts are damaged and that all parts are
correctly assembled. Incorrect assembly could
lead to injury. Please note that seals are wear
parts and therefore will require to be replaced
from time to time. Damaged parts could adversely
affect safety and proper function.
G⅜ (approx. 17 mm)
approx. 19 mm
RISK OF LOSS