Omnitronic UHF-500 Mode D'emploi page 17

Microphone
1. Microphone Grille
Protects capsule and prevents „pop" noise.
2. Antenna
3. Battery Indicator
When this light glows, change the battery.
4. ON / MUTE / OFF-Switch
Mute the microphone to prevent sounds from being transmitted to the receiver
To conserve the battery, turn off the microphone when not in use.
5. Battery Cover
Replace the cover for access to the battery and Dip switches.
6. Dip Switches
Select the desired channel via the DIP-switches.
17/35 00024889.DOC, Version 1.1