König Electronic SEC-PH340 Mode D'emploi page 3

Installing indoor unit:
1. Fix the mounting bracket with screws on the wall.
2/3. Slide the outdoor unit on the mounting bracket in the desired position.
Connection:
1. Plug the 3.5mm phone jack connecting cable to 7" monitor (answering unit) jack in.
2. Wire the connecting cable (Red) to terminal block with „LINE+" symbol on the outdoor unit.
3. Wire the connecting cable (Black) to terminal block with „LINE-" symbol on the outdoor unit.
4. Plug 15VDC adaptor to 7" monitor (answering unit) DC IN.
Note:
The outdoor unit can connect with all existing 2-wire door lock system by wiring the transformer to the
terminal blocks (UNLOCK)
See also following fi gure:
Rear view of the answering
unit
DC Adaptor
Rear view of the outdoor unit
3
Existing Door Lock
and Wiring