Unpacking The Device - LEXIBOOK RL975 Série Mode D'emploi

When unpacking, ensure that the following elements are included:
1 x Radio Projector Clock
1 x Instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this
product and should be discarded.
CLOCK
By default, you are in Clock mode. You are in Clock mode when time is displayed on screen.
1. In Clock mode, press and hold SET (6) for 3 seconds. The digit of hours starts flashing.
2. Press + (2) or – (3) to change the setting value. Then press SET to confirm and to move to the next
setting. The setting sequence is displayed in the following order:
Hours Minutes Year
Notes:
- While setting the date, the day of the week will automatically change.
- In any setting mode, if no key is pressed for more than 1 minute, the radio projector clock will automatically
exit the current mode and go back to Clock mode, displaying time and date.
3. When you have finished setting up the clock, press + repeatedly to switch between 12 and 24-hour display
("AM/PM" appears on the left in 12-hour clock display).
ALARM
1. Press MODE to switch to alarm mode: "AL" appears on the upper left corner of the screen.
2. Press and hold SET for 3 seconds. The digit of hours starts flashing.
3. Press + and - to change the setting value. Then press SET to confirm and to move to the next setting. The
setting sequence is displayed in the following order:
Hours Minutes Radio/Nature sound
4. If you have selected "Nature sound":
- to choose the alarm sound, press SOUND (1) repeatedly to listen to the different nature sounds.
- when you have chosen one, press and hold SOUND for 3 sec to turn off the sound.
- the last sound you have listened to becomes the alarm sound.

Unpacking the device

Settings
Month Date input language for the day of the week
8