Trouble Shooting - Wolf FLAMENCO D Traduction Du Mode D'emploi Original

System carbide milling wheel disc, #020944: for removing adhesives, PU and epoxy-
coatings and roughening anhydrite pavements („beating" action) Due
to the aggressive action, the system milling discs should not be used onto chip board.
Milling disc with star wheel segments, #014243
Additional to the new Systemmillingdisc the milling disc with star wheel segments offers high efficiency.
Producing a high effect of dismounting and an aggressive action, this disc is used for removing coatings and
adhesive residues. The result is a rough surface. Comes with 4 star wheel segments.
Cleaning pad discs 400 mm, 10 mm
For initial cleaning, #013543, For cleaning and mounting of gauze
For maintenance, #013544, For coarse cleaning and removing soil
For polishing, #013545, For polishing, cleaning and wax coating
Super pad discs 400 mm, 20 mm
For initial cleaning, #013546, For cleaning strong soiling
For maintenance, #013547, For coarse cleaning and removing soil
For polishing, #013334, For polishing, cleaning and wax coating

0 Trouble shooting

7.