AU Lens Manuel D'utilisation page 6

BLUETOOTH FEATURES
Pairing
Press and hold the MFB for 5 seconds (power off state) to turn on
and initiate Bluetooth
flash quickly and tone "pairing mode".
Automatic connection
1. The AU-Lens will enter low power mode after 1 minute of no
audio, but will stay connected to your device.
2. If your glasses are out of range from your device for 10 minutes
they will enter pairing mode. If there is no connection for 10
minutes your glasses will automatically turn off.
Reset
Press and hold the MFB for 5 seconds (power on state) to clear
pairing record and re-enter pairing mode. Disconnect your AU-Lens
in your decives bluetooth settings to reset pairing (Android devices
vary by system).
pairing mode. The blue LED indicator will
®