Remote Motor Installation - De Dietrich DHD1100X Guide D'utilisation

UTILISATION
This product is intended to extract fumes, fats, and steam from cooking. It has been designed
e either in the suction or filter versions.
The air extractor tubes are not supplied as standard.
Version with exterior evacuation
The hood is equipped with an air outlet (Refer to the image below).to convey smoke outwards
(the flue pipe and fixing flange are not supplied).
In filtering application that the stop valve doesn't permit the entrance of wind and exhausted
air.
Filtering version
In the case an exhausting hole is not possible, the hood can be used in filtering version. For
this mode charcol filters are to be fitted inside the hood. Filtered air will be evacuated in the
kitchen trough a duct that conveys the air on a side of the cabinet (Fig. 5).

- REMOTE MOTOR INSTALLATION

It is possible to install the motor in a remote position from the cooker hood, but it is necessary
to order the DHK900 - 989580001 kit.
28