Electrolux EI30HI55KS Guide D'installation, Utilisation Et D'entretien page 9

Dual Blower Motor Assembly
A.Wiring connection
6. To install blower motor assembly, slide the left
mounting plate ange under the motor mounting
bracket.
A
B
A.Motor mounting bracket
B.Mounting plate left ange
7. Push the right end of the motor mounting plate
down and snap it into the spring tab.
NOTE: The spring tab should be outside the slot
in the mounting plate.
A
B
Blower Motor Systems Installation
8.
A
9.
10.
mm mounting screws.
11.
A. Motor mounting plate
B. Spring clip
Align mounting holes and install 6 x 16 mm
bolts and 6.4 mm lock washers.
A. Bolt with lock washer
B. Mounting hole
Attach power cord connector from the hood insert
to connector on wiring box.
A. Wiring Box Connector
A
B. Hood Insert Connector
B
Install 10" round ducting damper with 4 - 4.2 x 8
B
A. 10" round ducting damper
B. Installation screws
Continue to Prepare the Location on page 12.
A
B
A
B
9