Battery Installation - König Electronic CMP-PRESENT20 Mode D'emploi

WIRELESS PRESENTER WITH LASER POINTER
FEATURES:
- Class II laser pointer
- Infrared remote control for computer presentation
- Support Microsoft PowerPoint, works on OS Windows 98 or latest version
- Power by: DC 3V, 2x1.5V
CONTROLS:

BATTERY INSTALLATION:

- The unit powered by 2 x 1.5V batteries
- Remove the battery compartment cover (1) by unscrewing the cover.
- Insert 2 x 1.5V batteries into the battery holder.
Note:
- Make sure that the + & - polarities are respected
- Do not mix old and new batteries
- Do not mix alkaline or silver-oxide batteries
- Put the battery compartment cover (1) back in position
LASER POINTER OPERATION:
Simply press the laser beam button (2) to activate the laser pointer; laser beam will emit directly from the
Laser output aperture (5)
Release the laser beam button (2) to turn off the laser pointer.
CAUTIONS:
Avoid direct eye exposure.
DO NOT LOOK DIRECTLY INTO THE LASER BEAM OUTPUT APERTURE DURING OPERATION!!
Be aware that laser light, when reflected off mirror-like surface, can also be dangerous.
Keep out of reach of children.
INFRARED FUNCTION:
Connect the infrared receiver to the USB port of your computer and the computer will select the USB
interface.
The sensitivity of the remote control can be adjusted.
Settings can be done on the CONTROL PANEL of your computer.
ENGLISH
(1) Battery compartment cover
(2) Laser beam button
(3) Page down button
(4) Page up button
(5) Laser Output aperture
(6) Infrared receiver USB (to computer)
2