Topcom BR 604 Guide D'installation Rapide page 7

• Now you can change the LAN settings:
- Click Next to proceed
• Now the BR604 will try to detect your broadband connection type
• Depending on your connection type next screen will appear: (for PPPoE, this screen will not appear if the auto
detection has been successful )
- Select your Connection Type
- Click Next to proceed
- Obtain IP automatilally (DHCP client) : this connection is mostly used for connecting the BR604 to a cable
modem.
- Fixed IP address : for connections with fixed WAN IP address.
- enter the WAN IP , Subnet Mask , Gateway and DNS addresses.
- Click Next to proceed.
Topcom Broadband Router BR 604
- The LAN IP address and Subnet mask can be changed.
- The router DHCP server can be Disabled / Enabled
- The DHCP range can be set.
7