Firefly Scooot Mode D'emploi page 13

Step 1
If you wish to use Scooot in the Scoot
or Crawl configurations you will need
to attach the front caster. Take caster I,
fitting F and washer G, and affix to the
Scooot base with the tool included in
the user pack.
The front caster should not be fitted
if you are using Scooot in the Ride or
Pooosh configuration.
F
G
I
Step 2
Fit the padded cover to the base.
Attach the cushion using the elastic
straps with the soft side facing up.
Align the slot in the upholstery with
the two holes in the top of the base.
Your Scooot is now ready to use in
the Crawl configuration.
Mount the elastic as
shown, ensuring it will
not catch in the casters.
Scooot User Manual p13