Unpacking The Device; Location Of Controls; Power Supply - LEXIBOOK HPBT010 Série Mode D'emploi

Casque bluetooth et filaire

Masquer les pouces Voir aussi pour HPBT010 Série:

Mode d'emploi (36 pages)

Mode d'emploi (8 pages)

Table Des Matières

Table des Matières

Les langues disponibles

When unpacking, ensure that the following elements are included:

1 x 2-in-1 Bluetooth® Headphones / 1 x USB Type C charging cable / 1 x

3.5mm audio cable / 1 x Instruction manual

WARNING: All packaging materials, such as tape, plastic sheets, wire ties

and tags are not part of this product and should be discarded.

Refer to the diagram p.2:

1. ON/Off - Bluetooth

2. Aux In jack

3. Play / pause

The Bluetooth® headphones operates with the USB type C charging cable

(included) or with a USB type adaptor (not included) 5V

Charging the device

1. Check that the Bluetooth is switched off.

2. Insert the small end of the USB type C cable

(included) into the USB type C charging port on the

right of the unit.

3. Connect the other end of the cable into the USB

port of your powered computer or USB type power

adaptor and connect it to a wall socket.

4. The LED lights up in red when the device is

charging. Once charging is completed, the LED light will turn off.

Note: Continue to enjoy listening to music with the Aux In cable when

charging the device.

Note: After approximately 5 minutes of inactivity, headset off automatically.

WARNING: Significant electromagnetic interference or electrostatic

discharges may cause the device to malfunction or lose data. If the device is

not functioning correctly, switch it off and then on again, or unplug the USB

cable.

WARNING:

• Risk of explosion if battery is incorrectly replaced. Please only replace it with

a same or an equivalent battery. (For Service instructions only; battery is not

intended to be replaced by the user).

• The battery should not be exposed to high temperatures, such as sunlight,

fire or anything similar.

• Keep a minimum distance around the device for sufficient ventilation;

• the ventilation should not be impeded by covering the ventilation openings

with items, such as newspapers, table-cloths, curtains, etc.;

• no naked flame sources, such as lighted candles, should be placed on the

apparatus;

• the use of apparatus in tropical and/or moderate climates.

• Batteries should be disposed properly. Take them to the collection container

in order to protect the environment;

HPBT010series_2021version_IM2360_V07.indb 7