1. Scope of delivery
•
1 camera support
•
2 cable straps
•
3 fixing screws
•
3 wall plugs
•
2 camera fixing screw
•
1 hex tip screwdriver
•
Installation instructions
2. Installing the support
1. Using the camera support as a template,
mark the 3 drill holes on the wall or
ceiling.
2. Drill the holes for the fixing screws.
3. First pull the cable through the camera
support (Fig. 1) and use the cable straps
to relieve the tension on the cable
(Fig. 2).
4. Using the screws supplied, screw the
camera support to the wall or ceiling.
Fig. 1
Fig. 2
6