Items Supplied
•
1 x real wax candle
•
1 x USB cable (A connector to Micro B connector)
•
1 x remote control with 1 x 3 V button cell (CR2025) al-
ready inserted (the protective strip must be removed)
•
1 x operating instructions
Check the items supplied for completeness and the compo-
nents for transport damage. If you fi nd any damage, do not
use the product but contact our customer service department.
Inserting / changing the batteries of the article
For battery operation, 2 batteries (1.5 V, type AA) are
required. They are not included in the product contents.
1. Open the battery compartment on the bottom of the can-
dle: Press the locking catch on the battery compartment
cover and remove it.
2. If applicable, remove the empty batteries and insert 2 new
batteries (1.5 V, type AA). In the process, make sure that
the polarity (+ / –) is correct.
3. Insert the battery compartment cover and fl ip it shut. It
must click audibly into place.
If the power of the candle diminishes, replace the batteries.
15
EN