Teka RV 500 B Mode D'emploi page 10

Wine Cellar Features And Use
RV 250 B
See FIG. 2
• The wine cellar is preset from the factory to automatically
accommodate temperature requirements for red or white wines.
If you store mostly white wines, press the "
and the wine cellar will maintain an average temperature between
7° to 10 °C. Pushing the "
temperature between 13 °C to 16 °C.
• The wine cellar can be set to any temperature you desire to
accommodate your wine storage requirements. To set the
temperature, press both the "
simultaneously and hold for approximately 3 seconds. Now you are
in temperature set mode. Decrease the temperature by pushing
the "
the "
adjust the temperature 3 degrees, press 4 times equals 4 degrees,
5 times equals 5 degrees, and so on. Once you have selected the
temperature you desire, push the "
cellar is programmed and the LED readout will return to current
internal temperature reading.
Note: You can add water to the tray to increase the humidity inside
the wine cellar. Some degree of humidity is required in order to keep
wines with corks from drying out. Even when wine bottles are stored
on their sides, one end of the cork is still exposed to air. If the cork
begins to dry out, it can allow oxygen to enter the bottle, filling the u-
llage space and possibly causing the wine to spoil or oxidize. Exces-
sive humidity can also pose the risk of damaging wine labels, which
may hinder identification or hurt potential resale value.
" button and increase the temperature by pressing
" button. Pressing the appropriate button 3 times will
" button will yield an average
" and "
" button. Now the wine
English
" button
" buttons
5