Table des Matières
Publicité
SENSOR INSTALLATION 2
19 mm (6/8 in.)
Fig 1
Fig 2
WARNING
• CHECK THAT THERE IS NO VEHICLE STRUCTURE BEHIND THE HOLE LOCATIONS BEFORE DRILLING.
• INSTALLATION OF THE SENSORS REQUIRES A MINIMUM OF 2.54 CM (1 IN.) IN DEPTH (FREE SPACE) BEHIND THE BUMPER SURFACE.
• WEAR EYE PROTECTION AND SUITABLE CLOTHING WHEN DRILLING; AVOID LOOSE CLOTHES, ACCESSORIES, OR HAIR THAT COULD
GET CAUGHT IN THE DRILL.
• Ensure that the hole saw sits firmly in the drill and does not wobble when the drill is turned on.
72
Publicité
Table des Matières
