Error Codes And Device Led Feedback; Flash Codes - HomeMatic HM-LC-Sw1-Pl-DN-R5 Mode D'emploi

Error codes and device LED feedback

• Press and hold down the channel button (A) again for at least 4
seconds until the device LED (B) will quickly start flashing red.
• Release the button again.
• The device LED stops flashing.
• The factory settings of the device are now restored.
8 Error codes and device LED feedback
8.1

Flash codes

Flashing sequence
Slow orange flashing
Fast orange flashing
1 s lighting up green
36
Meaning
Teach-in mode ac-
tive
Data exchange with
teach-in partner
Teach-in procedure
successful
> 4 s
Solution
Put the device you
want to teach-in into
teach-in mode.
Wait for confirmation
of the device LED.
You can continue with
operation.