Transport And Storage; Disposal Recycling; Guarantee - Greencut TD210L Manuel D'utilisation

TRANSPORT AND STORAGE

• Stop the tool, remove the battery, and allow the tool to cool before storing or transporting.
• Transport the battery in accordance with local and national provisions and regulations.
• Clean any foreign material from the product. Store in a cool, dry, well-ventilated place out of the reach of
children. Keep product away from corrosive agents such as garden chemicals and thawing salts. Do not store
outdoors.
• Store the battery and charger separately in a dry place, free from moisture and frost.
• Store the battery in a place without extreme temperatures, and away from direct sunlight.
• Ensure that no battery can come into contact with other batteries or conductive materials during transport by
protecting exposed connectors with non-conductive insulation caps or tape.
• Do not transport batteries that are cracked or leaking.
• Do not store the battery in places where static electricity may be generated. Never transport the battery in a
metal box.
• All batteries gradually lose their charge. Recharge batteries every 3 months.

DISPOSAL RECYCLING

Worn products are potentially recyclable and should not be disposed of in the usual trash. Help us protect the
environment and preserve natural resources.
Dispose of the device in an environmentally friendly manner. Do not dispose of with household garbage. Its plastic
and metal components can be separated and recycled. Take this device to an approved recycling centre (green dot).
The materials used in the packaging of the machine are recyclable: please dispose of them in the appropriate container.
ATTENTION: Take the battery to a local certified recycling and/or disposal center for disposal. If the
battery breaks or cracks, whether or not it leaks, do not recharge it and do not use it. Get rid of it
and replace it with a new one - DO NOT ATTEMPT TO REPAIR IT!

GUARANTEE

GREENCUT guarantees all GREENCUT products for a period of 24 months (valid for Europe). The warranty is subject
to the date of purchase taking into account the intended use of the product.
As a condition subject to warranty, the original receipt must be presented indicating the date of purchase and its
description as well as the defective tool.
The warranty does not cover normal wear and tear, especially on blades, blade fasteners, turbines, light sources,
fan and transmission belts, impellers, air filters, spark plugs and damage caused by improper use, especially non-
compliance with operating and maintenance instructions.
In the event that repairs or modifications have been made by the consumer or other than with original GREENCUT
spare parts, the warranty will be voided.
In the event of a justified warranty claim, we are entitled, at our discretion, to repair or replace the defective tool free
of charge. Other claims beyond this warranty are not valid.
45
EN