Operation And Adjustment - Essentiel MOUV'UP 32 Notice D'utilisation

4
When the screen is stable and horizontal, tighten the retaining screws as indicated
in the following diagram.
To remove the TV, unscrew the two retaining screws, and lift your TV carefully.
16 8
V.2.0 V.2.0
assembly of the stand

operation and adjustment

Once installed, your TV stand can be adjusted to suit your personal requirements.
You can adjust the vertical tilt of your TV by 15° (-10°/+5°)
Once adjusted you can lock the tilt of your TV by tightening the
-10°/ +5°
screws on the moving parts with an Allen key.
You can swivel your TV over a 60° angle (+/-30°), by moving the
swivel arm to the right or to the left.
The angle can be varied depending on the size of your screen and
the location of the TV stand in the room.
The shaft of your TV stand has three openings (J/K/L), to hold the connection cables
in an aesthetic manner, in accordance with the siting of the connection on the back
of your screen.
You can also clip the cable gland provided (M) to the two holes provided on the back
of the shaft for holding your connection cables.
!
We recommend that you pass the connection cables (electrical)
through the two openings (J and K) before screwing the TV
bracket onto the stand.
J
K
M
L
17 9
V.2.0 V.2.0
operation and adjustment