Terms And Conditions Of Warranty - Essentiel MOUV'UP 32 Notice D'utilisation

Operating instructions
!
Correct assembly is essential.
The manufacturer cannot be held liable for poor assembly.
Please follow the instructions in this manual and keep these instructions for future reference.
•
The packaging material (packaging paper, polystyrene) can be dangerous for children: there is a risk
•
of suffocation.
However, the screw fixings include lots of small components intended for assembly of the stand. Keep
•
them out of the reach of children.
Composition
Steel bracket
•
Aluminium post
•
Glass base
•
Assembly
Assemble the stand on a flat smooth surface in order to avoid scratching the glass.
•
Do not knock the glass with hard or pointed objects.
•
For maximum rigidity, all connection points and screws must be firmly fixed.
•
Advice for use and maintenance
For optimal cleaning, we recommend that you use a slightly damp microfibre cloth.
•
Do not sit or climb on the horizontal glass surface.
•
Please check that the screws are correctly fixed every 2 months.
•
If you have the slightest doubt about the installation of your TV stand, contact your professional installer.
•

Terms and conditions of warranty

For a 2 year period after purchase, if a defect appears, caused by defective material, your store
•
undertakes as an exclusive distributor, to repair or replace the defective part, subject to proof of
purchase and use compliant with the initial intended use of the product, as indicated in the instructions.
In the case of a claim under warranty, the product must be returned to the approved distributor with
•
the original sales receipt.
The sales receipt must clearly indicate the name and address of the sales outlet and the date of
•
purchase.
12 4
V.2.0 V.2.0
Operating instructions
The guarantee will be rejected if:
•
the product has not been assembled in accordance with the instructions.
-
the original parts have been modified.
-
he product has been used for purposes other than those recommended by the manufacturer.
-
Instructions on the use of the TV stand
This stand is able to support a maximum load of 50 kg for screens with a diagonal measurement of
•
32" to 75" maximum.
The weight of the screen must not exceed the maximum load capacity of the stand.
•
It is essential that you follow a correct installation procedure. This must be carried out by a qualified
•
person. Non-compliance with the installation instructions may lead to severe physical injury, linked to
falling or incorrect handling of the screen.
Do not install the stand near heating, a fireplace, direct sunlight, air-conditioning or any other sources
•
of direct heat.
Non-compliance may lead to the screen being damaged and may increase the risk of fire.
•
Do not install the stand in a very damp environment.
•
One month after installation, check that all the screws are firmly tightened, and that the plate is correctly
•
attached to the stand.
VESA standards
Maximum weight
Diagonal of screen
Swivel
Tilt
200 x 200
300 x 300
400 x 200
400 x 400
600 x 400
50 kilos
32" - 75"
82 cm - 190 cm
+/- 30°
-10° / +5°
13 5
V.2.0 V.2.0
Operating instructions