Turning On The Appliance; How To Adjust The Temperature To Suit Various Needs; Information And Malfunction Signals On The Display - Fhiaba 1T Mode D'emploi

TriMode compartment
If the "keypad locked" message appear, si-
multaneously press the keys Menu
Down (Down) for 3 seconds.
The displayed temperature may vary slightly
with respect to the set temperature if the doors
are continuously opened or insertion of room
temperature food or large quantities of food.
It takes 6 to 12 hours to reach the selected
temperature.
How to adjust the temperature for suit various needs
To adjust the temperature in the various compartments, use the up/
down key
If the "keypad locked" message appear, simultaneously press the
keys Menu
Wines compartment Each model has been carefully tested before leaving the factory and
is adjusted so as to ensure high performance and low consumption.
The ideal temperature for wine conservation does however depend
on the types of wine you want to conserve, the method of conserva-
tion (Wine Cellar for conservation and consumption, or Cantina (Ris-
erva) for the conservation and aging of prized bottles).
It also varies according to personal taste.
Please refer to the guide on wine conservation included further ahead
in this manual.
As needed, you can reset the temperatures as follows:
Cantina (Riserva) Compartment:
from +4° C to +18° C (from 50° F to 64,4° F).
The default temperature is +12° C (53.6° F).
Wine Cellar compartment:
from +4° C to +18° C (from 39.2° F to 64,4° F).
The default temperature is +10° C (50° F).
The TriMode compartment is default set to freezer mode but it can
also be set to run as a refrigerator or cooler compartment.
Instructions for conversion are provided in the paragraph on special
functions and settings.
and Up/
As needed, you can reset the temperatures as follows:
Freezer compartment: from -15° C to -22° C (from 5° F to -7.6° F).
The default temperature, which is recommended, is -18° (0° F)
Refrigerator compartment: from +2° C to +8° C (from 35.6° F to 46.4° F).
The default temperature, which is recommended, is +5° C (41° F).
Cooler compartment: from -2° C to +2° C (from 28.4° F to 35.6° F),
The default temperature, which is recommended, is 0° C (32° F).

Information and malfunction signals on the display

An integrated control system provides information through luminous
signals or text messages shown on the display.
The information signal is always displayed with a steady text message,
while a malfunction signal is shown with blinking text.
The acoustic signal that accompanies some malfunction signals can be
deactivated by pressing the Alarm key
The list of malfunction signals is located in the back of this manual.

Turning on the appliance

for that compartment (see chapter 3.5).
and Up/Down (Down) for 3 seconds.
4
4.2
4.4
on the main control panel.
11