Maintenance And Cleaning Instructions - Badabulle B010700 Notice D'utilisation

EN
WARNING
WARNING. NEVER LEAVE THE CHILD UNATTENDED.
prior to each use.
replacement for the safety harness.
CHAIR ASSEMBLY
1.
2. To install the handles, insert them on the top of the legs' tubes and press the metal buttons to make it enter in the holes. Make sure the metal
buttons are well inserted in the holes (Diagram 2).
3.
4.
5.
WARNING! Do not adjust the seat back with the child seated in the chair.
6. To adjust the height, press the adjustment button on two sides of the front legs and then adjust the height as desired.
WARNING! Do not adjust chair height with the child seated in the chair.
7. To fold the chair, place yourself in front of the chair, adjust the chair at the lowest position, and then press the 2 buttons at the same time on two
sides of the chair (Diagram 7).
8.
the buckle, make sure take out the child and press the buckle housing (Diagram 8).

MAINTENANCE AND CLEANING INSTRUCTIONS

the chair (A). Open the Velcro on the bottom of the seat (B). And then, pull the removable fabric lining upwards from the seat tube (C). Be careful
not to damage the lining.
Then, hook the snap on both sides of the chair.
and keep it out of the reach of children. If there is any damage to the chair, do not use it and keep it out of the reach of children.
6
IMPORTANT! READ CAREFULLY
AND KEEP FOR FUTURE REFERENCE