Oksys O-PK00092 Manuel D'installation page 2

Dye kit.
Code n. O-PK00092
Unscrew the front panel
by the screws indicated
and take out the front
panel.
NOTE: perform a
recovery, in case the lines
are still filled with
refrigerant gas, before
mounting the dye kit.
Screw the hose coupling
in position using some
thread glue.
Take out the nut of the
free valve position on the
manifold and screw in
the valve cylinder and
the relevant coil.
Instructions/Istruzioni/Anleitungen/Instructions/Instrucciones Ver. 2.0