Assembly Base Frame (Only For Zi-Hs7Tu) - Zipper Maschinen ZI-HS5TN Mode D'emploi

18

ASSEMBLY BASE FRAME (ONLY FOR ZI-HS7TU)

Due to its high weight, at least two persons are required to mount the log splitter on
the base frame
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS5TN; ZI-HS7TU
ASSEMBLY BASE FRAME (ONLY FOR ZI-HS7TU)
C A U T I O N
A. Disconnect device from the mains:
Make sure that the device is not
connected to the mains and is protected
against unintentional switching on!
B. Remove wheels and support leg:
Remove wheels (14) and support leg
(16).
32