Elesta RTM501B Mode D'emploi page 26

PROBABLE CAUSE:
REMEDY:

WARNING
- When deciding on a correct position, make sure that the radio signals
transmitted are received correctly by the receiving unit.
- Device installation and electrical connections must be carried out by
qualified personnel and must comply with the laws in force.
- Before making any connections, make sure the mains power is
disconnected.
In the view of a constant development of their products, the manufacturer reserves the
right for changing technical data and features without prior notice.
The consumer is guaranteed against any lack of conformity according to the European
Directive 1999/44/EC as well as to the manufacturer's document about the warranty
policy. The full text of warranty is available on request from the seller.
indicate any reception of commands via radio.
The signals received are too weak to enable correct
decoding of the commands.
Assess whether the devices need to be moved away
from metal shields or a "repeater" needs to be
installed.
26