Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Introduction:
Wireless camera system for observation and security. Colour camera in metal housing for outdoor use.
With IR LEDs for night vision. Monitor with screen reverse function and menu for personal settings. Extra
AV input for external source and AV output for recording. Also ideal as baby monitor.
Description camera:
3
1
Installing outdoor unit:
Select a suitable position from which you want to monitor the desired object. This position must not
been screened off by (too many) concrete walls, mirrors, metal shelves, etc. There should not be any
appliances with strong electric fi eld close to the camera or the TFT/LCD monitor.
Any strong electric environment could cause interference and reduce the performance.
Connecting the camera:
1. Connect the 7.5 V adaptor cord into the DC Input Jack of the camera.
2. Plug the adaptor into a standard (100V-240V) AC outlet.
3. Be sure to set the same channel to both camera and TFT/LCD monitor.
ATTENTION:
Wrong adaptor connected to the camera may cause damage to the camera.
6
2
4
5
7
• Screw the wall bracket with the supplied screws
to a suitable wall or a suitable platform use dow-
els if relevant.
• Guide the tripod thread of the wall bracket into
the thread hole of the camera and screw each of
them to one another.
• Align the camera and screw the T bolt tight.
2
1. IR LED and
lens
2. Fastening/
bracket thread
3. Power Jack
4. Microphone
5. Transmitter
antenna
6. Channel switch
7. DC Power
8. Camera bracket
8
Publicité
Table des Matières
