Maintenance And Cleaning - Pentatech DF-100TX Mode D'emploi

9 Connection pairing
The transmitter and receiver must be paired with each other to establish the
wireless connection. The transmitter delivered in the set is already paired with
the receiver on channel 1. Should you wish to change this channel or if you wish
to pair additional transmitter to the receiver (maximum 3 additional
transmitter) proceed as follows:
!
Select the point "Pair CAM" in the on-screen menu.
!
Select the desired channel.
!
Check that the transmitter is powered (POWER LED [9] lights red) and that
it is within the reception range of the receiver.
!
Press the channel selection button on the receiver to start the connection
procedure.
!
Within 60 seconds press the pairing button [11] on the transmitter and
hold it pressed for 5 seconds. The remaining time available to finish the
pairing is counted down on the screen.
!
A successful connection is indicated by the display of the camera picture on
the screen and the lighting of the red connection LED [10].

10. Maintenance and cleaning

!
The products are maintenance-free: do not open the housings
!
Check the safety and function regularly
!
Remove the mains adapters from the mains sockets before cleaning
!
Use a soft, slightly moist cloth or brush to clean the surfaces
11. Disposal
Do not dispose of packaging material, used batteries or products as
household waste. Please use your recycling system. Details are
available from your local authority.
12. Declaration of conformity
Indexa GmbH , Paul-Böhringer-Str. 3, D- 74229 Oedheim declares that this
product complies with the basic requirements and the other relevant
regulations of Directive 1999/5/EC. Conformity has been demonstrated. The
complete declaration of conformity can be read at: www.indexa.de
This product can be used in the following countries:
D A L CH
13. Warranty
This device is warrantied against defects for 2 years from the date of
purchase. Please keep your receipt as proof of purchase. The warranty covers
material or manufacturing defects only and does not cover, wear and tear or
damage to fragile parts. The product is intended solely for private use and
not for commercial use. In the event of incorrect and / or improper handling,
the use of force or any unauthorised repair to the device, the warranty will
become invalid. This warranty does not affect your statutory rights.
the device, the warranty will become invalid. This warranty does not affect
your statutory rights.
10 - GB
NL B IRL GB
Indexa GmbH
Paul-Böhringer-Str. 3,
74229 Oedheim
Germany
06/05/2010