Summer/Winter Mode - Olimpia splendid B0152 Mode D'emploi

RESETTING TO FACTORY SETTINGS
Hold button V+ down when you RESET the device. By releasing the V+ key after its reactivation , the
equipment will switch on with all operating parameters at the factory-set values.

SUMMER/WINTER MODE

The regulator can be set to "summer" or "winter" mode depending upon whether it is connected to an
air conditioner or heater. Press the E/I (S/W) key to change from one mode to the other (fig. 9). The
"summer" mode is displayed by the "snow" symbol ( ), while the "winter" mode is displayed by the
"sun" symbol ( ) (fig. 6D).
KEYPAD LOCK
Press the E/I key for at least 7 seconds to enable the keypad lock. The corresponding symbol will
appear on the display (fig. 6E). None of the keys will be enabled at this point. Press the E/I key again
for 7 seconds to return to the normal state.
SWITCHING OFF THE SYSTEM
Through the OFF button, you can switch off the system. The values set will not be lost. Press any key
to switch the system on.