Krüger & Matz SOUL Mode D'emploi page 10

2. Connect the other end into the 3.5 mm input of the device you wish to
play music from.
3. Please make sure the speaker is turned on.
4. Start playing music from your device.
CHARGING
1. Connect the USB charging cords to the charging ports of each of the
speakers and insert the other end into a port in a computer or other
USB charging device.
2. When the red light is on, the speaker is in charging.
3. When the battery is fully charged, the red light will turn blue.
4. When the battery level is low, the speaker's indicator will flash.
Note:
• please be sure the battery has been charged fully before first use.
• A speaker battery indicator will be displayed when connected to iOS devices.
TROUBLESHOOTING
No sound/Sound distortion:
• Check the volume on the external device.
• Charge the battery.
• Move the speakers closer together and ensure there are no obstacles
between them.
• Ensure that you are in the operational range (up to 10 meters).
• Turn off Wi-Fi or Bluetooth devices nearby or disable their Bluetooth
functionality to avoid interference.
• Turn off the speakers and then turn them on again.
Unable to pair with a Bluetooth device:
• Check if you are in Bluetooth mode.
• Ensure that you are in the operational range (up to 10 meters)
• Check if the device you are attempting to pair with supports A2DP
function.
• Turn off other Wi-Fi or Bluetooth devices nearby or disable their
Bluetooth functionality to avoid interference.
• Turn off the speakers and then turn them on again.
10
Owner's manual