Abus IPCB42510A Manuel Utilisateur page 85

7.4.3.8 HTTPS
Activate HTTPS:
HTTPS in the browser:
Create a self-signed certificate:
Install a signed certificate:
7.4.3.9 QoS
QoS determines the data flow between two network components on the basis of quality
parameters.
DSCP - Differentiated Service Code Point
enables the HTTPS function. This enables a secure
connection with connection certificate. Please note that
further steps are necessary for configuring the HTTPS
function.
when enabled, the HTTPS protocol is enforced when
accessing the camera via the web browser.
enter all of the details required for the certificate. When
accessing the camera at a later point, the connection
must also be confirmed in the browser.
install a HTTPS certificate from an external provider.
When accessing the camera at a later point, the
connection is automatically accepted as secure (address
bar shows green).
85