Users' Manual - BlueStork BS-EHD-35 Manuel Utilisateur

ENGLISH
3.5'' HDD ENCLOSURE
HARD DRIVE INSTALLATION:
FOR ENCLOSURE PURCHASE ONLY
STEP 1: Open the enclosure by
draw out the bottom metal panel.
STEP 2: Place the hard drive into
the enclosure frame. Make sure
the pins are aligned and push
forward to connect.
STEP 3: Screw in the large screws
included (Phillips head screwdriver
needed).
STEP 4: Replace the bottom panel
and screw in the included small
screw.

USERS' MANUAL

2
USB 3.0 port
LED
OFF/ON
DC power